About the Journal

SCIENCE, ENGINEERING AND TECHNOLOGY

ISSN: 2744-2527 (Online); ISSN: 2831-1043 (Print)

Science, Engineering and Technology (SET Journal) is a multidisciplinary, open-access, and double-blind peer-reviewed journal focusing on the science, engineering, and technology aspects and their practical applications.

Major topics of interest include, but are not limited to:

  • Computer Science and ICT
  • Traffic and Transportation Engineering
  • Mechanical Engineering
  • Electrical and Electronic Engineering
  • Civil Engineering
  • Architecture and Planning
  • Industrial Engineering and Management
  • Logistics, Distribution, and Warehousing
  • Environmental Science and Engineering
  • Applied Mathematics and Statistics
  • Interdisciplinary Applications
  • Multidisciplinary (SET)

The journal publishes original research articles, review articles, and case studies. Thanks to our sponsors, APC fees for article submitted by the end of July 2025 will be reduced by 50%, from 500 USD to 250 USD.

More information

REGISTER TO BECOME A REVIEWER - Are you passionate about staying updated with the latest research and scholarly articles in your field? Do you have insights and expertise you're eager to share? If so, we invite you to join our community of reviewers! By providing constructive feedback on submissions, you play a vital role in shaping the direction and quality of the articles we publish.Reviewers receive a certificate upon completing their review, as well as an APC discount and other benefits. List of Reviewers / Find out more...

 

Current Issue

Vol. 5 No. 1 (2025)

BH Telecom JSC and GDG Sarajevo are proud sponsors of Vol. 5, No. 1, supporting a reduced APC for contributing authors.

DOI: https://doi.org/10.54327/set2025/v5.i1
Published: 30.04.2025

Research Article

  • Performance Analysis of Fractionalized Order PID Controller-based on Metaheuristic Optimisation Algorithms for Vehicle Cruise Control Systems

    Abdelhakim Idir, Abderrahim Zemmit, Khatir Khettab, Mokhtar Nesri, Sifelislam Guedida, Laurent Canale
    1-14
    DOI: https://doi.org/10.54327/set2025/v5.i1.241

  • Uncertainty Quantification and Sensitivity Analysis of Concrete Structure Using Multi-Linear Regression Technique

    Abdelhamid Hebbouche, Salim Bennoud, Ayoub Zeroual
    15-28
    DOI: https://doi.org/10.54327/set2025/v5.i1.205

  • Towards Sustainability: Tracking Carbon Footprint Trends at Ezemvelo KZN Wildlife

    Kgaphudi Wendy Madiope, Jacob Adedayo Adedeji, Sebataolo Rahlao
    29-44
    DOI: https://doi.org/10.54327/set2025/v5.i1.206

  • Investigation of the Properties of Waste Expanded Polystyrene (EPS) Modified Bitumen

    Ganiyu Abolore LAWAL, Professor B. I. O. Dahunsi
    45-54
    DOI: https://doi.org/10.54327/set2025/v5.i1.221

  • Fine-tuning AraGPT2 for Hierarchical Arabic Text Classification

    Djelloul BOUCHIHA, Abdelghani BOUZIANE, Noureddine DOUMI, Benamar HAMZAOUI
    55-65
    DOI: https://doi.org/10.54327/set2025/v5.i1.224

  • Thermo-Mechanical Assessment of Bio-based Insulating Material Using Phase Change Materials and Date Palm Fibers

    Mahi Eddine Brahimi, Mustapha Maliki, Nadia Laredj, Hanifi Missoum, Miloud Sardou
    66-76
    DOI: https://doi.org/10.54327/set2025/v5.i1.209
  • Graphical Abstract

    Odour, Colour and Turbidity Removal from Selected Industrial Wastewater Using Electrocoagulation Process

    Peter Abiodun Akinlabi, Titilayo Elestina Adepoju, Chibueze Godwin Achi, Akinwale Oladotun Coker
    77-97
    DOI: https://doi.org/10.54327/set2025/v5.i1.153

  • Performances improvement of DC Motor using a Fractional Order Adaptive PID Controller optimized by Genetic Algorithm

    Abdelouaheb Boukhalfa, Yassine Bensafia, Khatir Khettab
    98-105
    DOI: https://doi.org/10.54327/set2025/v5.i1.179

  • A Computational Model of Attention-Guided Visual Learning in a High-Performance Computing Software System

    Alice Ahmed, Md. Tanim Hossain
    106-115
    DOI: https://doi.org/10.54327/set2025/v5.i1.245

  • Reducing the Delay Time and Tracking Trajectory of the Robot SCARA Using the Fractional PID Controller

    Yassine Bensafia, Abdelhakim Idir, Khatir Khettab
    116-125
    DOI: https://doi.org/10.54327/set2025/v5.i1.188

  • Effect of Soil Salinity on Thermal Behavior of Sandy Soils Under a Sahara Climate

    Djihad Bennaceur, Nadia Laredj, Mustapha Maliki, Hanifi Missoum
    126-136
    DOI: https://doi.org/10.54327/set2025/v5.i1.212

  • Diagnosis of Multiple Open-circuit and Short-circuit Faults in Three-phase Multicellular Inverter Based on Sliding Mode Observer

    Fatma Khater, Abderrezak Aibeche, Sid Ali Fellag, Mohamed Zinelabidine Doghmane, Hamza Akroum
    137-153
    DOI: https://doi.org/10.54327/set2025/v5.i1.237

  • Direct Torque Control of Dual Three Phase Induction Motor fed by Direct Power Control Rectifier using Fuzzy Logic Speed Controller

    Radhwane Sadouni, M’hamed Sahnoun, Ilyes Zababe, Hassen Reghioui
    154-162
    DOI: https://doi.org/10.54327/set2025/v5.i1.173

  • Optimal Placement and Sizing of Renewable Distributed Generators for Power Loss Reduction in Microgrid using Swarm Intelligence and Bio-inspired Algorithms

    Nabil MEZHOUD, Ahmed Bahri, Bilel Ayachi, Farouk Boukhenoufa, Lakhdar Bouras
    163-176
    DOI: https://doi.org/10.54327/set2025/v5.i1.208

  • A Comparison of Machine Learning Algorithms for Predicting Alzheimer’s Disease Using Neuropsychological Data

    Zakaria Mokadem, Mohamed Djerioui, Bilal Attallah, Youcef Brik
    177-191
    DOI: https://doi.org/10.54327/set2025/v5.i1.182

  • Identification of Plasma Proteins Associated with Alzheimer's Disease Using Feature Selection Techniques and Machine Learning Algorithms

    Zakaria Mokadem, Mohamed Djerioui, Bilal Attallah, Youcef Brik
    192-202
    DOI: https://doi.org/10.54327/set2025/v5.i1.189

  • Malware Detection Using a Random Forest Method Trained on a Balanced Synthetic Dataset

    Neo Onica Matsobane, Sello Mokwena
    203-212
    DOI: https://doi.org/10.54327/set2025/v5.i1.167

Review Article

  • An Overview on Blockchain-based Social Media

    Patikiri Arachchige Don Shehan Nilmantha Wijesekara
    213-247
    DOI: https://doi.org/10.54327/set2025/v5.i1.222

  • Complementary Machining – Machining Strategy for Surface Modification: A Review

    Thabo Mathonsi, Rudolph Frans Laubscher
    248-273
    DOI: https://doi.org/10.54327/set2025/v5.i1.150

  • A Review on the Implementation and Effectiveness of Lean Manufacturing Strategies for Industrial and Service Sectors

    Kapil Gupta, Pallab Sarmah, Samuel Loyiso Gqibani
    274-285
    DOI: https://doi.org/10.54327/set2025/v5.i1.157

Case Study

  • Assessment of Refuse Dumpsite Impact on Groundwater Quality: A Case Study from Awotan, Ibadan, Oyo State, Nigeria

    Ibrahim Adetayo Lawal, Chibueze Godwin Achi, Akinwale Oladotun Coker
    286-303
    DOI: https://doi.org/10.54327/set2025/v5.i1.161
View All Issues