Modeling and simulation of fiber optic transmission links

Authors

DOI:

https://doi.org/10.54327/set2022/v2.i1.22

Keywords:

capacity of fibre optic transmission link, WDM data speed transmission, simulation of wdm sistems

Abstract

The main aim of the paper is modeling and simulation of fiber optic transmission. It also deals with ways to increase the capacity of fiber optic transmission links by using WDM (Wavelength Division Multiplexing) system. The parameters of the fiber optic transmission link were measured on a real optical transmission links and a model for simulation was set up. A simulation of increasing the capacity of a fiber optic transmission link was made in two ways. The first one is to increase the transmission speeds of the individual channels of the WDM system, and the second one is to increase the number of WDM system channels with lower individual speeds. The simulation results showed that the second method provides better quality of WDM service. The additional experiment was done on an existing ITU T G.655 optical fiber intended for WDM systems whose parameters were measured. Bit error rate and Q parameter for WDM system of 4 and 16 channel was used to check quality of proposed solution.

Downloads

Published

30.04.2022

How to Cite

Modeling and simulation of fiber optic transmission links. (2022). Science, Engineering and Technology, 2(1), 16-23. https://doi.org/10.54327/set2022/v2.i1.22

Similar Articles

1-10 of 20

You may also start an advanced similarity search for this article.